Groove Type Ultrasonic FlowmeterIt Is An Ultrasonic Flow Meter Designed Specifically For Groove (clamp) Connection Pipelines, Using Time Difference/Doppler Method To Measure Flow. It Has No Mechanical Components, No Pressure Loss, And Is Easy To Install. It Is Suitable For Groove Type Pipeline Systems Such As Fire Protection, Water Supply And Drainage, And Municipal Pipeline Networks.

1、 Core Structure And Principles

Main Body: Integrated/split Sensor+converter, Groove Flange/clamp Connection, Directly Connected To Groove Pipeline.

Principle: Calculate The Flow Velocity By Measuring The Time Difference Between The Forward/backward Propagation Of Ultrasonic Waves, And Then Combine It With The Pipe Diameter To Obtain The Flow Rate; No Throttling, No Wear And Tear.

Sealing: The Sensor And Pipeline Are Reliably Sealed And Compatible With Common Groove Diameters Such As DN50-DN600.

2、 Core Features

Groove Quick Installation: Clamp Connection, No Need For Welding/flange Bolts, Installation/disassembly Only Takes A Few Minutes, Suitable For Renovation And Rapid Construction.

No Pressure Loss, No Blockage: The Flow Channel Is Straight Through, Without Mechanical Impellers, Not Afraid Of Impurities And Mud, Suitable For Sewage, Rainwater, And Fire Water.

Stable Accuracy: Measurement Accuracy * * ± 1.0% - ± 2.0% * *, Unaffected By Temperature, Pressure, And Density.

Intelligent Remote Transmission: With LCD Display, Supporting 4-20mA, Pulse RS485/Modbus、GPRS， Remote Meter Reading And Monitoring Are Available.

Durable Protection: Protection Level IP67/IP68, Temperature Resistance 0-80 ℃, Pressure Resistance 1.6MPa, Suitable For Humid And Well Environments.

3、 Typical Applications

Fire Protection System: Flow Monitoring Of Fire Water Pipes, Metering Of Pump Rooms, And Acceptance Testing.

Municipal Water Supply And Drainage: Community Water Supply, Rainwater And Sewage Pipe Network, Non Full Pipe/full Pipe Flow Measurement.

Construction Project: Trench Type Pipeline Renovation, Temporary Water Metering, Site Drainage Monitoring.

Industrial Circulating Water: Cooling Circulating Water, Sewage Treatment Plant Inlet/outlet Metering.

4、 Key Selection Points

Pipe Diameter: DN50-DN600 (groove Standard).

Medium: Conductive/Impurity Containing Liquid (clear Water, Sewage, Rainwater, Fire Water).

Installation: Both Horizontal And Vertical Are Acceptable, With Low Requirements For Straight Pipe Sections (5D In The Front And 3D In The Back).

Power Supply: 24VDC/220V AC, Optional Battery Power Supply (low Power Consumption).

German Standard Gate Valve

German Standard Copper Gland Gate Valve

German Standard Soft Seal Gate Valve

German Standard Elastic Seat Sealing Gate Valve